Concept Technology Service Support How to get started About us Deutsch Setting up the WORLD WLAN device and starting your own public hotspot is very easy. When you get you WORLD WLAN package it only takes a few minutes to bring up your own hotspot, due to the defaults you just have to adjust. In case you are not familar with setting up a network device (like a router or modem) we will give you personal installation support!  You have access to a knowledge base, which will give you on a click of  a mouse lots of tips about operating a successful public hotspot. Support: Setting up a Netgear DSL-Modem/Router to work with a WORLD WLAN device: 1. Go to your webinterface of your netgear-device and select "Security/services". Then click on "Add custom service". This is what you have to type then: Name: hotelairspot, Type: TCP Start-Port: 3128 End-Port 3128. Click on "Apply" when done.     2. Next click in the left-menu on "Security/firewall rules" and on "Inbound-Services" click to add so you will see this picture. Enter the following: Service: hotelairspot Action: ALLOW always Send to LAN Server: 10.0.0.130** Click "apply" ** If you changed WAN-IP use that IP instead. That's just it! Now connect your WORLD WLAN device's Internet-Port (WAN) to one (or the only) LAN-port of your DSL-Modem/router if you haven't already done so. Continue with setting up the WORLD WLAN device as stated in the online manual. At 192.168.110.2/setup you will find a webinterface for your WORLD WLAN. Copyright in 2004 by XCONY Information Systems GmbH | Home | Impressum